SoilPro 513
The SoilPro 513 Disk Ripper from Wil-Rich is designed to work in a variety of soil conditions, breaking up deep compaction while properly sizing and mixing residue on the surface to give next year’s crop the best advantage! The SoilPro 513 performs primary tillage, leaving a smooth, uniform surface ideal for seedbed preparation.
The SoilPro 513 is available in cutting widths from 12 ½ to 26 feet (3.8 – 7.9 m). The SoilPro 513 industry-best, large-diameter, 28-inch (71 cm) disk blades on two-rank individual C-spring disk blades bury and mix residue for quick decomposition. The disk blades are independently adjustable from the rear ripper shanks. Those 3,500-pound (1,588 kg) spring reset ripper shanks penetrate even the toughest soil ensuring consistent fracturing of the soil layers.
Features
Main Frame
- 4 x 8″ (10 x 20 cm) tubular frame
- 5 x 7″ (13 x 18 cm) tubular hitch
- Level lift tongue
- Adjustable drawbar height
Hydraulics – Rigid Units
- Two main lift cylinders 41/2 x 12″ (11 x 30 cm)
- Two disc lift cylinders 4 x 8″ (10 x 20 cm)
Hydraulics – Folding Units
- Two main lift cylinders 5 x 12″ (13 x 30 cm)
- Two wing lift cylinders 41/2 x 12″ (11 x 30 cm)
- Two main disc lift cylinders 4 x 8″ (10 x 20 cm)
- Two wing disc lift cylinders 33/4 x 8″ (10 x 20 cm)
- Four fold cylinders 4 x 36″ (10 x 91 cm)
Jack
- Hydraulic hitch jack
Wheels
- 385/65R 22.50/8-bolt new or used tires
HP (PTO)
- 5 shank, 300 – 400 HP
- 7 shank, 300 – 450 HP
- 9 shank, 350 – 450 HP
- 11 shank, 450 – 550 HP
- 13 shank, 500+ HP
Safety Equipment
- Safety chain
- Transport warning lights
- Mechanical transport locks
- Slow moving Vehicle sign
Axle
- Walking tandem beam axles on main frames and wings
Hitch
- Fabricated steel Cat. V tongue hitch for 2-3/4″ (7 cm) diameter pin
- Visual gauge of relative disc depth
- Level lift hitch
Shank Parabolic
- Now utilizes high tech, service free polymers and require zero routine maintenance
- 11/4″ (3 cm) high-strength, abrasion-resistant steel with chromium carbide shin guards
- Spring reset shanks
- Two trip extension springs
- Trip height of 18″ (46 cm)
- Working depth of 14″ (36 cm) maximum
- 3,500 lbs. (1,588 kg) max. trip pressure
- Shank spacing 24 or 30″ (61 or 76 cm)
- Transport height clearance 12″ (30 cm)
Disk
- Smooth blades 28 x 5/16″ (71 x .8 cm)
- SoilRazor blades
- 19″ (48 cm) blade spacing, 9.5″ (24 cm) effective cut
- Hydraulic depth control
- Individual disk blades
- C-spring mounted
- 18 degree cutting angle
Working Depth
- Shanks 0 to 14″ (0 – 36 cm)
- Discs 0 to 8″ (0 – 20 cm)
Operating Speed
- 4 to 6 mph (6 – 10 kph)
Gallery
Specifications
Non-Fold Models
Model Number |
Shank Spacing |
Cutting Width |
# of Shanks |
# of disks |
Trans. Width |
Trans. Height |
Trans. Length |
Approx. Weight lbs. |
Approx. Power Req’d |
|---|---|---|---|---|---|---|---|---|---|
| 5-30 SP 513 | 30″ (76 cm) |
12’6″ (3.8 m) |
5 | 18 | 16’2″ (4.9 m) |
7′ (2.1 m) |
33’5″ (10.2 m) |
17,180 (7,793 kg) |
300-400 HP |
| 7-24 SP 513 | 24″ (60 cm) |
14’0″ (4.3 m) |
7 | 18 | 16’2″ (4.9 m) |
7′ (2.1 m) |
33’5″ (10.2 m) |
18,061 (8,192 kg) |
300-450 HP |
| 9-24 SP 513 | 24″ (60 cm) |
18’0″ (5.5 m) |
9 | 24 | 21’3″ (6.5 m) |
7′ (2.1 m) |
33’5″ (10.2 m) |
21,143 (9,590 kg) |
350-450 HP |
Folding Models
Model Number |
Shank Spacing |
Cutting Width |
# of Shanks |
# of disks |
Trans. Width |
Trans. Height |
Trans. Length |
Approx. Weight lbs. |
Approx. Power Req’d |
|---|---|---|---|---|---|---|---|---|---|
| 9-24 SP 513 | 24″ (60 cm) |
18′ (5.5 m) |
9 | 24 | 15’9″ (4.8 m) |
11’10” (3.6 m) |
33’5″ (10.2 m) |
22,567 (10,236 kg) |
350-550 HP |
| 11-24 SP 513 | 24″ (60 cm) |
22′ (6.7 m) |
11 | 30 | 19’3″ (5.9 m) |
13’8″ (4.2 m) |
33’5″ (10.2 m) |
32,280 (14,642 kg) |
450-550 HP |
| 13-24 SP513 | 24″ (60 cm) |
26′ (7.9 m) |
13 | 34 | 19’3″ (5.9 m) |
14’8″ (4.5 m) |
33’5″ (10.2 m) |
33,688 (15,281 kg) |
500+ HP |
Note: Adding harrows to a unit may increase the transport width and/or height of the unit.
Note: Approximate weight = base weight + tire group